Filter
Top Products
An External Monitor Is Blank
Adjust the brightness and contrast of the
monitor screen
Check that the monitor’s power cable is
securely connected to the monitor and to
an electrical outlet.
Make sure the monitor is set for the
correct input and can support the video
mode you have selected. See your monitor
manual for more information.
You may have switched your display to
LCD mode. Press Fn F10 until you see the
display on your external monitor.
If the monitor still does not work, turn off
both the computer and the monitor. Then
check the electrical outlet for power.
Contact your Authorized EPSON Servicer
or the EPSON Connection for assistance.
An External Pointing Device Doesn’t
Work
If you have disabled the pointing device
in Setup, make sure your new pointing
device driver is installed and loaded See
the documentation that came with your
device for instructions
7-14 Troubleshooting