Kenwood DNX5360M GPS Receiver User Manual


 
66 DNX5360/DNX5360M/DDX5036/DDX5036M
Setup Menu
To register your original color
Start the RGB coordinate1
Adjust each color value2
1
1
1
1 Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
Select a Preset number to register3
2 sec.
Adjusted color is registered to the selected
Preset button.
Complete the color coordination4
Screen Adjustment
You can adjust the screen mode of the monitor.
Display the Screen Adjust screen1
Touch [
]
>
[ ]
>
[Display]
>
[Screen
Adjust]. (page 59)
Set each item2
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Navigation Day/Night display
setting. (DNX series and DDX
series with navigation unit only)
• In this Screen Adjust screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 43).