Filter
Top Products
58 DNX5360/DNX5360M/DDX5036/DDX5036M
Audio Control
Zone Control
You can set the front and rear audio source.
Display the Zone Control screen1
Touch [
]
>
[ ]
>
[Zone Control]. (page 56)
Set the Zone Control2
[Single Zone] Sets the unit to single zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
When the rear speaker sound is switched, the audio •
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
There are following limitations when zone function is set •
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 57) and <Speaker Setup>
(page 72) are not available.