Kenwood DNX5360M GPS Receiver User Manual


 
English 61
User Interface
You can setup user interface parameters.
Display the User Interface screen1
Touch [
]
>
[ ]
>
[System]
>
[User
Interface]. (page 59)
Set each item2
[Beep] Turns the key touch tone On or Off.
( "ON")
[Remote Sensor] Selects a remote control
signal. (
"ON")
When turned "OFF", the remote control of TV
reception is rejected.
[Language] Select the language used for the
control screen and setting items. (page 61)
[Scroll] Allows scrolling of text display on the
Source Control screen. (
"Manual")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
[Marker] Sets whether to display the target
when touching the panel. (
"OFF")
[Drawer Close] Sets whether to close the
function bar automatically. (
"Manual")
[FNC Key Longer than 1 Second] Sets the
function of the [FNC] button.
(
"R-CAM")
"V.OFF" : Press the [FNC] button for more than
1 second to turn the display off.
"R-CAM" : Press the [FNC] button for more than
1 second to switch to rear view.
[Animation] Sets whether to display
animation. (
"ON")
Language Setting
You can select the display language for the
control screen and audio file tags.
Display the User Interface screen1
Touch [
]
>
[ ]
>
[System]
>
[User
Interface]. (page 59)
Display the Language Setting screen2
Select a language3
[Select Mode] Selects language select mode.
(DNX series only) ( "Easy")
"Easy" : Language to display text and tag
information, and language for GUI can
be selected.
Navigation language is set to that
selected in [Text Language Select].
"Advanced" : Language to display text and
tag information, language for
GUI, and language for navigation
information can be selected.
[Text Language Select] Selects the language
to display text information of the selected
source and tag information of the audio/video
files.
(
"British English")
[GUI Language Select] Selects the language
used for the control screen, setting menu and
so forth. (
"Local")
"Local" : Sets the language to that selected in
[Text Language Select].
"English" : Sets the language to English.
[Enter] Determines the selected language.
[Cancel] Cancels the selected language.
Next page 3