Filter
Top Products
Sub Harness (Original Meter) Installation
1. To connect the original meter (Black).
2. To connect the right switch housing (Black).
3. To connect the left switch housing (Black).
4. Semitransparent connector (not use)
5. To connect the shift up indicator (Green).
Install the harness (26031-0426) for the original meter as shown in the illustration.
When using the original meter, use the left and right original switch housings.
NOTE
When using the original meter, function the head light dimmer switch or/and passing
button for the speed control switch function.
Hold the stop watch function of the stop watch switch.
In case of difficulty confirming the shift up indicator lamp in the original meter, connect to
the [5] optional shift up indicator lamp.
51