Filter
Top Products
Use the kit sub radiator with the main radiator.
Water Inlet of Radiator Body
Divide the original water hose (39062-0109) between the cylinder head and the radiator
and insert the water pipe (39192-0039).
Install the kit water temperature sensor (for water temperature gauge of kit meter,
21176-1099) to the kit water pipe.
Pinch the terminal of the kit water temperature sensor ground lead (26011-0071)
between the water hose and the kit water pipe and clamp it on the hose as shown in the
illusturation. Install the other side terminal of the ground lead with the crankshaft sensor
cover.
Water Outlet of Main Radiator
Remove the original water pipe (39192-0029) and install the kit water pipe (39192-0038).
Install the kit water hose (39062-1072) between the water pipe and the kit sub radiator.
Reserve tank Installation
When using the radiator (Kit), the original reserve
tank cannot be used. Prepare a suitable substitute
reserve tank.
Reserve Tank should be equipped with a band so
as not to affect the running and the handling.
NOTE
Capacity of a reserve tank should be more than 200 cc.
Position of the hose to a reserve tank.
* End of the hose to the radiator should be always in the coolant.
* End of the hose to atmosphere should be always beyond the coolant surface.
35