Filter
Top Products
Water Temperature Sensor
The original water temperature sensor installed in the cylinder head must be remain and
connected to the main harness because the electronic control unit (E.C.U.) needs the
output signal from the original water temperature sensor.
Radiator (Kit)
2006 model ZX-10R racing kit provides the sub radiator (39060-0030) to improved the
cooling function.
Radiator Installation
Sub Radiator
Cut the brackets at the bottom of the main radiator.
A. Cut the brackets.
Install the sub radiator stays as shown in the illustration.
Fix the center kit stay (35063-0316) on the crankcase by the bolt.
Fix the right side kit stay (35063-0317) on the starter cover [A] by the bolt.
Fix the left side kit stay (35063-0318) on the alternator cover [B] by the bolts.
If the stay contacts to the around parts, grind the stay to privent the contact.
As some stays may not be able to install according to the applied muffler, remodel the
stay or make suitable one by your owe.
32