Filter
Top Products
Transmission
Type B ~ D of the kit gears are available of the 2006 model ZX-10R. To change the gear
ratios with combination the gears.
Remove the three steel balls (600A0500) from the output shaft assembly. This is done to
start easily the engine with the second gear.
Replace the circlips with new ones if they were removed.
Transmission Shimming
By using washers with various thickness, keep the axial clearance between 0.3 mm and
0.4 mm, to prevent the inclination of gears and to keep smooth gear-shifting.
Thickness (mm) Part No. Remarks
1.2 92200-0229 Kit
1.4 92200-0230 Kit
1.6 92200-0050 Original
1.8 92200-0231 Kit
Spline washer
2.0 92200-0232 Kit
0.8 92200-0225 Kit
1.0 92200-0226 Kit
1.2 92200-0051 Original
1.4 92200-0227 Kit
Plane washer A
1.6 92200-0228 Kit
Plane washer B
1.4 92200-0138 Original
26