Filter
Top Products
Front Fork Springs (Kit Parts)
The kit front fork springs are available for racing.
1) Front Fork Specifications
Items Original
Rebounded damping setting (Upper) 9th (0 ~ -11)
Compression damping setting (Lower) 7th (0 ~ -13)
Fork oil KAYABA KHL 15-10
Fork oil level 111 mm
Oil lock Oil lock piece
Oil seal – – –
Spring length 230.1 mm (mount), 232.1 mm (free)
Spring constant 8.8 N/mm
Spacer length 101 mm
Sub spring stroke 20.5 mm
2) Front Fork Spring
P/No. A × B × C (mm) Number of Wiring Spring Constant
Original 4.7 × 28.7 ×232.1 14.6 K = 9.25 N/mm
44026-0091 4.8 × 28.5 ×232.1 14.8 K = 9.5 N/mm
44026-0092 4.8 × 28.5 ×232.1 14.1 K = 10.0 N/mm
44026-0093 4.9 × 28.3 × 232.1 14.7 K = 10.5 N/mm
A: Coil Diameter
B: Spring Inside Diameter
C: Spring Free Length
3) Front Fork Spring Replacement
Replace the main spring referring to the Fork Oil Change section of the base Service
Manual.
Identification Mark
The following ID marks are on the springs.
Spring
ID Mark (Smaller
diameter end side)
44026-0091 (K = 9.5) One slit
44026-0092 (K = 10.0) Two slit
44026-0093 (K = 10.5) Three slit
43