Filter
Top Products
7.0 AIRFLOW METER WORK
7.1 Locate the new air filter base from your kit and
install it to the air flow meter intake port, reusing the
Mazda cork gasket and four nuts. The air flow meter
is offset toward the top of the air filter base. The
seven pin electrical connector on the airflow meter
faces upward.
7.2 Locate the driver’s side shock tower support and
notice the Mazda air filter box mounting bracket
(painted body color) on the forward edge. This verti-
cal bracket is held in place by a horizontal bolt (also
painted body color). Remove the bolt using a 10mm
socket and store the bracket. On the “flying but-
tress” closest to the firewall, bend the captive nut
tang downward to make room for the plastic elbow
section using a small screwdriver in the hole.
Supercharger Installation Instructions
999-156 -10- Revised 1/07