Filter
Top Products
Automatic Mode
LDW is automatically ON when you start the vehicle. It then activates at
vehicle speeds over approximately 45 mph. The indicator light on the
LDW button will illuminate indicating the system is ON.
To Turn OFF LDW for One Drive ONLY:
Press the LDW button. The indicator light on the button will go out.
Manual Mode
For your convenience, you may choose to manually override the LDW system so
that it doesn’t turn ON when you start the vehicle. In Manual mode, there will
be no visible or audible warnings when your vehicle is about to move out of its
travel lane.
To Change from AUTOMATIC MODE to MANUAL MODE:
1 Push the ignition switch to the ON mode.
2 Verify the LDW button indicator light is illuminated after the 3-second
self-check.
3 Press and hold down the LDW button for approximately 4 seconds until a
repetitive chime sounds.
To Change from MANUAL MODE to AUTOMATIC MODE:
1 Push the ignition switch to the ON mode.
2 Verify the LDW button indicator light is not illuminated after the 3-second
self-check.
3 Press and hold down the LDW button for approximately 4 seconds until a
repetitive chime sounds.
4 Press the LDW button to turn ON the system. The indicator light on the button
will illuminate.
Intelligent All-Wheel Drive
(if so equipped)
The All-Wheel Drive (AWD) system enhances all-weather performance by
supplying driving power to the front wheels (in addition to the rear wheels) in
various traction conditions. AWD is automatically ON when the vehicle is started.
Snow Mode
(if so equipped)
Driver-selectable “Snow mode” helps improve low speed
traction for slick weather conditions. By reducing throttle
sensitivity, driveability is enhanced.
N Push the SNOW switch to the ON position for slick road
conditions. The indicator light on the switch will illuminate.
N Push the switch to OFF for normal operation.
18