Filter
Top Products
28
TELAIO
Tipo ..................................monotrave in tubi a
sezione circolare, in acciaio;
telaietto posteriore in lega leggera
SOSPENSIONE ANTERIORE
Tipo... forcella teleidraulica a steli rovesciati e
perno avanzato (regolabile in compressione ed
estensione); steli ∅ 45 mm
Corsa sull'asse gambe .....................300 mm
SOSPENSIONE POSTERIORE
Tipo ..............................................progressiva
con monoammortizzatore idraulico
Corsa ruota........................................320 mm
FRENO ANTERIORE
Tipo...........................a disco fisso ∅ 260 mm
con comando idraulico e
pinza flottante
FRENO POSTERIORE
Tipo......................a disco flottante ∅ 220 mm
con comando idraulico e
pinza flottante
CERCHI
Anteriore ........................ TAKASAGO "Excel"
in lega leggera 1,6"x21"
Posteriore........................TAKASAGO "Excel"
in lega leggera 2,15"x18" (WR 125) e
2,15"x19" (CR 125)
FRAME
Type....................................Single-beam with
circular steel tubes; light alloy rear frame
FRONT SUSPENSION
Type....
“Upside Down” forkrod telehydraulic
fork with advanced pin (adjustable in
compression and rebound shoke);
forkrods Ø 1.77 in. dia.
Legs axis stroke................................. 11.8 in.
REAR SUSPENSION
Type .............................................progressive
with hydraulic single shock absorber
Wheel stroke.......................................12.6 in.
FRONT BRAKE
Type .......................floating disc 10.24 in. dia.
with hydraulic control;
floating caliper
REAR BRAKE
Type..................floating disc 8.66 in. dia. with
hydraulic control;
floating caliper
RIMS
Front ...............................TAKASAGO "Excel"
in light alloy. Size: 1,6"x21"
Rear................................TAKASAGO "Excel"
in light alloy. Size: 2,15"x18" (WR 125) and
2,15"x19" (CR 125)
CADRE
Type....................Mono-axe avec tubulures à
section circulaire, en acier;
cadre arrière en alliage leger
SUSPENSION AVANT
Type.........
à fourche téléhydraulique à tiges
renversées et goujon avancé (reglable en
compression et extension);
tiges Ø 45 mm.
Levée sur l'axe jambes......................300 mm
SUSPENSIONE ARRIERE
Type..............................................progressive
avec monoamortisseur hydraulique
Levée roue.........................................320 mm
FREIN AVANT
Type ............à disque flottant ∅ 260 mm avec
commande hydraulique;
étrier flottant
FREIN ARRIERE
Type..................à disque fixe ∅ 220 mm avec
commande hydraulique;
étrier flottant
JANTES
Avant...............................TAKASAGO "Excel"
en alliage léger 1,6"x21"
Arrière .............................TAKASAGO "Excel"
en alliage léger 2,15"x18"(WR 125) et
2,15"x19" (CR 125)
IMP. 1-125-2002 7-12-2001 16:41 Pagina 28