Filter
Top Products
Returning the Seatbacks to an
Upright Position
{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That
could cause injury to the person sitting there.
Always push and pull on the seatback to be
sure it is locked.
{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted will not provide
the protection needed in a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that the safety belts are properly
routed and attached, and are not twisted.
To return the seatback(s) to the upright position, do the
following:
1. Lift the seatback up and push it rearward all the way.
2. Place your hand under the front of the seat cushion
and lift the cushion while moving it rearward until it
latches into position.
3. Pull forward on the seatback and push down on
the seat cushion to make sure the seat is securely
in place.
Safety Belts
Safety Belts: They Are for Everyone
This part of the manual tells you how to use safety
belts properly. It also tells you some things you should
not do with safety belts.
1-10