Filter
Top Products
Sunroof
To operate a power sliding sunroof, the ignition must be
on, or Retained Accessory Power (RAP) must be active.
See Retained Accessory Power (RAP) on page 2-20.
The switch used to
operate the sunroof is
located in the headliner.
Open/Close: Press and release the back of the switch
to fully open the sunroof. If the sunshade is in the
closed position, it automatically opens with the sunroof.
To stop the sunroof before it reaches the full open
position press and release the front or back of the switch.
An air deflector raises when the sunroof is fully opened.
Press the front of the switch to close the sunroof.
Vent: With the sunroof closed, press and hold the front
of the switch to vent the sunroof. To stop the sunroof
before it reaches its full vent position, release the switch.
Press and hold the back of the switch to close.
Do not keep the sunroof open for long periods of time.
Debris may collect in the tracks.
Sunshade Operation
The sunshade automatically opens with the sunroof,
but can be manually pulled shut after the sunroof
is closed.
To adjust the sunshade, push it backward or pull it
forward to the desired position. The sunshade cannot
be adjusted further than the current closed position
of the sunroof.
2-60