Filter
Top Products
Whereis® Navigator Installation Guide for HP iPaq with In-Built GPS - version 2.5 Page 13
Please read the disclaimer carefully by
scrolling. Once you have read it to the
bottom, you can ‘Accept’ to continue or
‘Decline’ if you do not agree.
Once you click Agree, you will see the
Main Menu.
Select ‘Configuration’ from the options.
Using the horizontal menu options at the
bottom, arrow right until you see
‘License’. Select this menu tab and then
enter the license key provided to you.
Once entered, select ‘OK’ at the top right
and you are now ready to use Whereis®
Navigator.
Note: The GPS is defaulted to com port 7 and
baud rate 4800. If you modify this, please
ensure it is set correctly before attempting to
operate Whereis® Navigator.