Filter
Top Products
3. Press SEL to start field selection. Turn the Large
knob to the desired field.
Dtk 353 48.0nm Trk 353 tae 000
4. Turn the Small knob to select the field with
different units. Press SEL to stop editing.
Dtk 353 89.10km Trk 353 tae 000
Magnetic Variation
Automatic or Manual Magnetic Variation can be set
in this page. Automatic is the default setting on
power-up, unless the database is invalid.
1. Press the SYS key. Turn the Large knob to reach
the Magnetic Variation page and then press SEL.
Mag Variation: Auto 180E
3. Turn the Small knob to select Auto or Manual
Magnetic Variation and then press ENT.
Mag Variation: Manual 180E
4. If you selected Manual Magnetic Variation, turn the
Large knob to move to the variation value field.
Mag Variation: Manual 18
5. Select the variation value with the Small knob.
Mag Variation: Manual 190E
72
System Functions
ENT
SEL
SYS
SEL