Filter
Top Products
The estimated fuel flow can be selected from 0000
to 9999 units per hour. The units may be set in the
System function (see page 71). Pressing ENTsaves
the entered value if the value entered is less than or
equal to 999 US gallons per hour, after any
necessary conversions are performed. If the value is
too large when ENT is pressed, it is truncated to the
largest possible value for the units selected, and
remains flashing for editing.
After entering the Estimated Fuel Flow, a four
second help screen indicates either “Fuel To Uses
Actual Gr Speed” or “Fuel To Uses Est Gr Speed,”
depending on whether the current flight plan is
active or not.
Delete Plan
Pressing ENT when the “Delete Plan” option is
displayed deletes the current flight plan. The
display returns to the previous flight plan’s name
(or first) page. The *Active* flight plan cannot be
deleted, in which case this option is not displayed.
Route 2 259nm Delete Plan?
Hold
The Hold option is available for the Active flight
plan when the flight plan status is Active (waypoint
sequencing allowed). This function is used while
viewing the Name Page.
1. In the Flight Plan function, turn the Large knob
to display the Name Page.
*Active* 259nm Dest: PDT Y
2. Press SEL. The “Hold?” option will flash.
*Active* 259nm Hold?
58
Flight Plan Functions
SEL