Filter
Top Products
6. Press ENT when you have finished entering the
waypoint information. You will be prompted to
create a name for the waypoint.
#000 USER 44010.96N 121043.35W
7. Now, use the Large and Small knobs to enter the
waypoint name. You can also adjust Lat/Lon and
add the Runway Length. Press ENT when you
are finished.
CABIN USER 44010.96N 121043.35W
Note
You should never create a Radial/Distance
User waypoint from another Radial/Distance
User waypoint. “Chaining” this type of
waypoint in a string may cause additive
errors in the waypoint position.
Delete User
Waypoint
1. In the SL50, press the WPT key. In the SL60,
press the SYS key, turn the Large knob to view
the “Waypoint” page, and then press ENT.
2. Turn the Large knob to view the “Delete User
Waypoint” page.
Delete User Wpt: Press ENT
3. Press ENT. Turn the Small knob to view the
User waypoints.
WPT to Delete: CABIN Press ENT
4. When the waypoint to delete is displayed, press
ENT.
45
Waypoint Functions
ENT
ENT
ENT
ENT