Filter
Top Products
5. Turn the Small knob to view the nearest 20
waypoints.
Setting Runway Limits
Narrow the type of airports that you will accept by
choosing the runway length, lighting, and surface
type.
1. While in the Emergency Search function, turn the
Large knob to view the “Runway Limits”
display.
Rwy Limits:H/S/W Ft:0 Lit:No
2. Press SEL. The runway length value will flash.
Turn the Small knob to select the minimum
runway length you want considered. Choosing a
length of 0 feet means you will accept any
runway length.
Rwy Limits:H/S/W Ft:3500 Lit:No
3. Turn the Large knob to move to the next
selection. With the “Lit” value flashing, turn the
Small knob to choose “Yes” or “No” for the
runway lighting requirement.
Rwy Limits:H/S/W Ft:3500 Lit:Yes
4. Turn the Large knob to cause the runway surface
type to flash. Turn the Small knob to choose
from the Hard (H), Soft (S), or Water (W)
surface types. Soft refers to grass, dirt, or gravel
runways.
Rwy Limits:H/S Ft:3500 Lit:Yes
5. Press ENT to save your choices.
27
Navigation Basics
SEL
ENT