Garmin RS-232 GPS Receiver User Manual


 
25
COMPATIBLE RECEIVERS:
ARNAV R15, R20, R21, R30, R40, R50, R50V, R50i, R5000,
FMS5000, Star5000, FMS7000
BENDIX/KING KLN-35, KLN-89B, KLN-90, KLN-90A,
KLN-90B, KLN-94, KLX-135, KLN-900
BFGOODRICH/
FOSTER
F4, F14, 500, 501, 616, LNS-6000
GARMIN 100, 150, 150XL, 155, 155XL, 165, 250, 250XL, 300, 300XL
GPS 400/500, GNC 420/520, GNS 430/530
MAGELLAN 5000
NORTHSTAR M1 (above S/N 14800), M1A, M2, M3, 60, 600
SKYFORCE (*AIM) KMD-150, Skymap II, Skymap IIIC
*Avionics Installation Module
TRIMBLE 1000DC, 2000, 3000, 2100, 3100
IIMorrow/
UPS Aviation
Technologies/
Garmin AT
Apollo 612B, 618, 618TCA, 820
GX-50/55/60/65, 360, CNX80
NMS 2001, NMC 2001
Microflo-L supports the interface for NMEA 0183 version 2 Input Protocol.
This Protocol is available from most Handheld GPS Receivers. No output
communication from the Microflo-L to the Handheld GPS Receivers is
supported in this configuration.
PIN ASSIGNMENTS:
PIN Microflo-L
P/N 91204XT-38-D
TRANSDUCER
68050X
TRANSDUCER
6605XX
1 +14VDC or +28VDC (2A Circuit breaker)
2 Airframe Ground
3 Left/Single Fuel Flow Transducer Power
(+12VDC to Transducer)
Red Wire
(+12VDC input)
PIN A
(+12VDC input)
4 Right Fuel Flow Transducer Power
(+12VDC to Transducer)
Red Wire
(+12VDC input)
PIN A
(+12VDC input)
5 Ground to Left/Right Fuel Flow Transducer Black Wire PIN C
6 TX RS-232 (to LORAN or GPS)
7 Left/Single Fuel Flow Transducer Signal White Wire PIN B
8 Right Fuel Flow Transducer Signal White Wire PIN B
9 RX RS-232 (from LORAN or GPS)