Filter
Top Products
10
Move the USED/REM toggle switch to the REM position. The
system will display the fuel remaining on board. The pilot should
confirm this figure with the actual fuel on board.
2.3 NO FUEL ADDED
This automatically stores information concerning previous fuel
levels, even in the case of a power down. If no fuel is added, no
action is needed in updating fuel data.
2.4 FUEL TANKS FULL
There are two methods to enter full fuel: the ramping method and
the ADD/FULL toggle switch method.
Ramping Method
• Move the USED/REM toggle switch to the REM position and
hold.
• Press the ENTER/TEST button to increment the fuel remaining
until the total usable fuel is reached. (The longer you press, the
faster the incrementing.)
• Release the USED/REM toggle switch and the ENTER/TEST
button to enter the total usable fuel on board into memory.
• If the required figure is exceeded, follow the procedure in this
manual, section 2.6 Correcting Fuel on Board Entry Error.
ADD/FULL Toggle Switch Method
• Move the ADD/FULL toggle switch to the FULL position and
hold.
• Press the ENTER/TEST button.
• Release the ADD/FULL toggle switch so it returns to the center
position.
• To verify, move the USED/REM toggle switch to the REM
position. Total usable fuel will be displayed.