Filter
Top Products
Quest Owner’s Manual 53
APPENDIX > CHANGING THE FUSE AND INSTALLING THE MOUNTING DISK
To reconfigure the extending suction mount:
1. Loosen the adjustment knob closest to the suction cup and
remove the knob/pin.
Adjustment
knob
Reconfiguring the Extending Suction Mount
2. Remove the suction cup from the rest of the mount.
3. Rotate the suction cup 180 degrees.
4. Reconnect the suction cup to the rest of the mount.
5. Replace the adjustment knob and tighten.
Extending Suction Mount Reconfigured
You can then attach the suction cup mount to the disk following
the previous set of directions. Reconfiguring the suction cup
mount gives you more flexibility in positioning your unit for better
viewing.