Garmin Quest TM GPS Receiver User Manual


 
Quest Owner’s Manual 47
APPENDIX > QUEST SHORTCUTS AND DATA FIELDS
APPENDIX
Quest Shortcuts
Press and hold FIND to navigate to your Home location.
Press and hold
MENU to display the Route Options menu.
Press and hold
OK to display the Where Am I? page.
Press
FIND two times to display the Recent Finds page.
Press
MENU two times to display the Settings page.
Press
Power to open the backlight illumination window.
Press zoom
IN or OUT to scroll up or down a list.
Press
MENU and IN at the same time to shut off the Quest if
it locks up.
Data Fields
The following data fields are available in your Quest:
Accuracy GPS—estimated GPS accuracy in feet or meters.
Arrive-Destination—estimated time of arrival at your destination.
Arrive-Next—estimated time of arrival at the next turn.
Bearing—compass direction from your location to your
destination. (Appears only on the Compass page.)
Course—direction from your starting location to a destination.
(Appears only on the Compass page.)
Distance-Destination—distance to your destination.
Distance-Next—distance to your next turn.
Elevation—elevation of your current location.
Heading—current direction of travel. (Not available on the Trip
Information page.)
Location (lat/lon)—displays longitude and latitude of your current
location.
Location (selected)—displays your current location in the position
format you select in Units Setup page (see page 40).
Name-Destination—name of the destination. (Appears only on the
Compass page.)
Name-Next—name of your next upcoming turn or maneuver.
(Appears only on the Compass page.)
Odometer—running total of distance traveled. Unlike the Trip
Odometer, the odometer cannot be reset.
Off Course—distance left or right you are from the original course
(path of travel). (Appears only on the Compass page.)