Filter
Top Products
The Jeppesen database used in the GPS 155 features Standard Terminal Arrival
Routes (STARs) and Standard Instrument Departures (SIDs) that may be placed into
any active or stored route.
Available SIDs may be selected at any time for the active route as long as the
departure airport is the first route waypoint and the route contains more than one
waypoint. Activating a SID or STAR will modify the waypoint sequence of Route 0. If
you’d like to save the contents of Route 0, be sure to copy it to an empty route first.
To select and activate a SID:
1. Press
R
and rotate
O
until the SID Select page appears.
2. Press
C
and rotate
O
until the SID name flashes.
3. Press
E
. The SID waypoints will be inserted in the route.
If a SID has more than one runway or transition, the SID Select page will display
the available runway designations and/or transitions.
To select a transition:
1. Rotate
O
until the transition name flashes and press
E
.
To select a runway:
1. Rotate
O
until the runway designation name flashes and press
E
.
79
APPROACH NAVIGATION
Selecting & Activating SIDs
Selecting a SID transition.
Selecting a SID.
155man (GOOD) 7/24/98 1:57 PM Page 79