Filter
Top Products
2 c510 Owner’s Manual
GETTING STARTED
Step 1: Mounting the c510
Select a suitable location to mount the c510 on your windscreen. Clean and dry the
selected area of your windscreen.
➌
➊
➋
Windscreen
1. Plug the power cable into the back of the c510.
2. Place the suction cup on the windscreen. Flip the lever back, toward the
windscreen.
3. Snap the socket on the back of the c510 onto the ball at the end of the suction cup
mount.
4. Plug the power cable into a power receptacle in your vehicle. Your unit should turn
on automatically if it is plugged in and your vehicle is running.
To remove the c510 from the mount, turn the c510 as far as you can to the right or left.
Apply pressure in that direction until the c510 snaps off the mount.
To remove the suction cup from the windscreen, flip the lever toward you. Pull the tab
on the suction cup toward you.