Filter
Top Products
3. Press ENT to place the active flight plan on hold.
Waypoint sequencing will be inhibited. Waypoint
sequencing remains inhibited until it is reenabled,
even if you change waypoints or legs manually.
*Active* Holding Dest: PDT Y
Continue
The Continue option is available for the Active
flight plan when the flight plan status is Holding
(waypoint sequencing is not allowed). Pressing
ENT when this option is displayed renews
waypoint sequencing.
1. In the Flight Plan function, turn the Large knob
to display the Name Page.
*Active* Holding Dest: PDT Y
2. Press SEL. The “Continue?” option will flash.
*Active* 259nm Continue?
3. Press ENT to continue on the previously active
flight plan. Waypoint sequencing will be enabled.
*Active* 259nm Dest: PDT Y
Destination
Waypoint
Information
Normal waypoint information about the destination
waypoint can be viewed by pressing INFO when
the Plan Name Page is displayed. This is the same
as pressing INFO to view information about a To
waypoint, except that the Plan Comment page is
available by turning the Large knob.
Flight Plan
Comments
A flight plan comment page can be viewed and
edited for each flight plan by pressing INFO when
the Plan Name Page is displayed and the turning the
Large knob.
59
Flight Plan Functions
ENT
SEL
ENT
INFO