Filter
Top Products
GPSMAP 188/188C Sounder Owner’s Manual 53
MAIN MENU > ROUTES TAB
Routes Tab
The Route List Page displays all the routes currently stored in
memory, along with a descriptive name for each route. After a route
has been created, it can be activated and used for navigation with
the NAV key. A route can be followed in the same sequence as it
was originally created, or you can invert the route and navigate
from the end waypoint back to the beginning waypoint. From
the Route list menu, you can choose New Route (page 17), Copy
Route, Delete Route, or Delete All.
To start a route with the NAV key:
1. From any page, press NAV, highlight Follow Route, and
press ENTER. If you highlight a route from the Route
List or Route Review Page, and press NAV the window
automatically displays Follow <the route name>.
2. Highlight the route you want to navigate, and press ENTER.
3. Choose Activate or Invert and Activate, and press
ENTER. Activate uses the route as is. Invert and Activate
reverses the route, then starts.
If you highlight a route
name from the Route
List and press NAV,
the name automatically
appears.
To stop navigation of a route:
Press NAV, highlight Stop Navigation, and press ENTER.
To copy or delete a route:
1. From the Route List, highlight the route you want to copy or
delete using the ROCKER, and press MENU.
2. Choose either Copy Route or Delete Route and press
ENTER. With OK highlighted, press ENTER again to
confirm a deletion. Copy uses the same route name with
an additional number, starting at 1, at the end of the route
name.
To delete all routes:
1. From the Route List, press MENU.
2. Highlight Delete All, and press ENTER. With OK
highlighted, press ENTER again to confirm the deletion.