Filter
Top Products
nüLink! 1695 Owner’s Manual 3
Getting Started
1. Remove the clear plastic from the
suction cup
➊
.
2. Place the suction cup on the
windshield.
3. Flip the lever back toward the
windshield.
4. Plug the vehicle power cable
➋
into the back of the cradle.
5. Snap the cradle
➌
onto the
suction cup arm.
➌
➋
➊
6. Plug the other end of the vehicle
power cable into a power outlet
in your vehicle.
7. Fit the bottom of your device into
the cradle.
8. Tilt your device back until it
snaps into place.
Charging Your Device
Charge your device for at least 4
hours before using it on battery
power.
Your device can be powered three
ways.
Connect the vehicle power cable
to the mount while the device is
in the mount.
Connect the USB cable.
Connect an AC adapter (available
on some device models).
•
•
•