Filter
Top Products
1. MOUNTING, WIRING
3
1.2 Flush Mounting, Fixed at Rear
This is the standard installation method.
1. Make a cutout in the mounting location with the “Flush mounting template” (included).
2. Attach the flush mounting sponges H15 and V15 in the order shown in the figure below.
3. Connect all cables at the back of the display unit. See section 1.7.
364±1 (14.33”)
314±1 (12.36”)
9 (0.35”)
9 (0.35”)
4-ø18(0.71”)
Flush Mounting Sponge (H15)
for top and bottom
Flush Mounting Sponge (V15)
for right and left