Filter
Top Products
1-15
Thru-hull mount water temperature sensor
T-02MSB, T-03MSB
• Select a mid-boat flat position. The sensor does not have to be installed per-
fectly perpendicular. The sensor must not be damaged in dry-docking opera-
tion.
• Select a place apart from equipment generating heat.
• Select a place in the forward direction viewing from the drain hole, to allow for
circulation of cooling water.
• Select a place free from vibration.
Mount the sensor as shown below.
Figure 1-21 Thru-hull mount water temperature sensors
T-02MSB, T-03MSB