Filter
Top Products
44
Fig. 69
SHIFT
DATE
q
w
Fig. 70
Hold down the SHIFT button q and press the r
mark on the multi-operation button w to illuminate
only the r guide lamp. Continue to press the r
mark to select the number of required self-timer
exposures (maximum of 3.) The self-timer exposure
count displayed in the LCD will be selected when the
SHIFT button is released, and the guide lamp will be
extinguished.
When the shutter release is depressed, the camera
focuses on the subject in the AF frame and the self-
timer starts. The self-timer lamp (or multi-operation
button’s guide lamp) will begin to blink approximately
7 seconds after being illuminated, and the shutter
will be released approximately 3 seconds after that.
Subsequent self-timer exposures will be taken at
intervals of between 3 to 6 seconds when 2 or 3
consecutive self-timer exposures have been set.
✻ Do not press the shutter release button while
standing in front of the camera. This may cause a
focusing error or underexposure.