Filter
Top Products
Hold down the SHIFT button q and press the c
mark on the multi-operation button w to illuminate
only the c guide lamp. Continue pressing the c
mark to enable sequential selection of the exposure
mode.
The mode displayed in the LCD will be selected
when the SHIFT button is released, and the guide
lamp will be extinguished.
No display : Multi program flash mode
Used during normal exposures
The amount of flash released will be automatically
adjusted in accordance with the brightness, distance
and magnification of the subject.
✻ For bright remote scenes, the flash does not fire.
✻ Refer to pages 31 to 32 for further details on the
Multi Program flash.
30
Fig. 45
Fig. 46
SHIFT
DATE
q
w