Filter
Top Products
28
When a cartridge that was removed in mid-roll j is
reloaded, the film will automatically be advanced to
the first unexposed frame. After that, operation is as
before.
✻ Even if you forget how many frames were exposed
on a cartridge that was removed in mid-roll, just
reload the cartridge. The camera will
automatically set the remaining number of
unexposed frames and display that number on the
LCD.
Fig. 43
SHIFT
DATE
●
Cautions Concerning the Mid-roll Change Function
✻ When a cartridge that has been removed in mid-roll ( j is
displayed) is reloaded into the camera, if “ B ” blinks in the
film counter, reload the cartridge once more, avoiding the
following locations.
• Anywhere near a drier, fan, vacuum cleaner, etc., which
has a rotating motor.
• Near an active TV or personal computer display.
✻ If a cartridge is removed in mid-roll j and then loaded into a
camera which does not have the MRC function, the cartridge
will be set to exposed k and can no longer be used.
✻ A cartridge removed in mid-roll k from a camera which does
not have the MRC function cannot be used even if loaded
into this camera.