Filter
Top Products
Movement adjustment of selective functions
28
(“AIR” button)
If you push the “AIR” button, the current setting is
high-lighted.
The display changes at each push on the “AIR” button, and the
selected movement starts 2 seconds after the selection.
(Movement of the selected function is displayed on the LCD.)
(AIR “STRENGTH” button)
If you push the “STRENGTH” button, the air strength
setting menu is displayed and the currently selected
function is high-lighted.
Default setting of “STRENGTH” is “STRONG”.
The display changes at each push on the “STRENGTH” button,
and the movement starts with the selected “STRENGTH” 2
seconds after the selection.
(Selected “STRENGTH” is displayed on the LCD.)
(“STRENGTH” button)
If you push the “STRONG” button or “GENTLE” button,
the present setting position lamp illuminates.
* This can be set at other than the “RUBBING” and “DEEP
KNEAD”.
Illuminating lamp moves from the present position to left at each
push on the “STRONG” button while it moves to right at each
push on the “GENTLE” button.
Hardness setting value is displayed as final 2 seconds after the
setting.
LEG
⋅
THIGH
⋅
BOTTOM
LEG
⋅
BOTTOM
LEG
⋅
THIGH
LEG STOP
AIR:
STRON
G
AIR:
STRON
G
FOOT STRETCH
AIR: GENTLE
AIR: STRONG
STRENGTH
S G
MIN
MIN