Filter
Top Products
Use of the AUTO COURSE (Operate the following with the remote controller lid closed)
16
1. Turn ON the power switch.
(Power switch is found at the back of the left arm rest.)
“POINT NAVI SYSTEM” and “PUSH THE START SWITCH”
will be shown on the LCD display alternately.
(They are displayed regardless whether the lid is opened or
closed.)
Sit deep in the chair and recline yourself comfortably with the back
of your head rest on the back rest.
* You should be better to recline the back rest slightly to use
well the Point Navi.
2. Push the “START/RESET” button.
“Select a COURSE” is displayed.
3. Select a desired AUTO COURSE and push the button on
the remote controller.
4. When you have selected one of “WHOLE”,
“SHOULDER” or “WAIST”, a submenu to select from
further three modes is displayed.
The display is switched at each push on the “AUTO COURSE”
button and the selected mode starts to operate.
If you select the “7 MIN” course, the body shape detection is
bypassed.
SHOLDER
WAIST
7 MIN
STRENGTH
ADJUST
SHOLDER
UP
DOWN
AIR
POINT NAVI
SYSTEM
PRESS THE
START SWITCH
Select a COURSE
WHOLE BODY
REJUVENATE
REFRESH
RELAX
AUTO
COURSE
WHOLE