Filter
Top Products
13/42
SK5W7J-19A361-AA
© Copyright Ford 2005
2W7Z-16A901-AA
Rev Date- 8/29/05
STATUS LED
Identify a suitable mounting location for the status LED.
Make sure that there is at least 3/4” clearance behind
the selected mounting location.
1
Drill a 9/32” mounting hole.
If necessary, remove the selected trim panel
2
3 4
Insert status LED into drilled hole.
5
If necessary, reinstall any interior trim panels removed
during this procedure.
6
The LED will plug into the main wiring harness during
the wiring steps. Make sure to leave the LED pigtail
accessible.