Filter
Top Products
Seating
and safety restraints
95
Safety belt extension assembly
If the safety belt is too short, even
when fully extended, 20 cm
(8 inches) can be added to the
safety belt assembly by adding a
safety belt extension assembly
(part number 611C22). Safety belt
extension assemblies can be
obtained from your dealer at no
cost.
Use only extensions manufactured
by the same supplier as the safety
belt. Manufacturer identification is
located at the end of the webbing
on the label.
Also, use the safety belt extension
only if the safety belt is too short
for you when fully extended. Do
not use extensions to change the fit
of the shoulder belt across the
torso.