Filter
Top Products
Maintenance
and care
239
High-mount
brake lamp bulbs
Open the luggage compartment.
With a screw driver remove the
fixings and trim from the tailgate.
Pull the bulb holder from the lamp
assembly. Pull the bulb out.
Install in reverse order.
Replacing
interior lights
Switch off the interior lights
(middle switch position). Pry out
the light assembly with a flat screw
driver at the side opposite the
switch.
Dome
lamp
Replace the bulb. Fit new bulb in
the reverse order.
Rear
dome lamp
Remove the reflector and replace
the bulb. Fit new bulb in the
reverse order.
Map
lamps
The bulbs can be replaced after the
contact plate has been hinged back.