Filling station information
280
Item Information
Recommended fuel Unleaded fuel only - 87 octane
Fuel tank capacity 50 L (13.2 gallons)
Engine oil capacity
(includes filter change)
Zetec: 4.25 L (4.5 quarts)
CVH: 3.78 L (4.0 quarts)
Tire size and pressure
See Safety Compliance
Certification Label on the rear
most driver's side door jamb
Hood release
Pull handle under the left side of
the instrument panel
Coolant capacity* 5.75 L (6.1 quarts)
Power steering fluid capacity Fill to line on reservoir.
Manual transaxle fluid capacity 2.0 L (2.1 quarts)
Automatic transaxle fluid
capacity**
6.6 L (6.9 quarts)
* If your engine requires additional coolant, use Ford Premium Cooling
System Fluid. Refer to Lubricant Specifications.
** Ensure correct automatic transaxle fluid is used for a specific
application. Check the container to verify the fluid is MERCON and/or
MERCON V approved. Some fluids have been approved as meeting both
MERCON and MERCON V requirements and will be labeled as such.
Fluids labeled as meeting only MERCON or only MERCON V
requirements must not be used interchangeably. DO NOT mix MERCON
and MERCON V. Transaxle fluid requirements are indicated on the
dipstick or on the dipstick handle. Refer to your Scheduled Maintenance
Guide" to determine the correct service interval.