Filter
Top Products
PERIODIC MAINTENANCE
PERIODIC MAINTENANCE
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the red positive (+) pole of
the battery. (see figure 24)
2. Connect the black negative (-) cable to the black negative (-) pole
of the battery. (see figure 25)
Note: The red positive (+) cable has a larger diameter than the
black negative y cable.
3. Charging rate: Charge battery @ 0.7 Amps for 5 ~ 10 hours.
• After charging is complete, press down firmly with both hands to
seat the caps. (Do not pound or hammer.) The battery is now
sealed. (see figure 26 and 27)
• Install battery into battery tray making sure that the rubber mat is
in place. The warning label on the battery should be facing the
warning label on the gray tray. (see figure 28)
• Once battery is firmly seated in gray tray with rubber mat under it,
attach the red positive wire to the red positive terminal on the
battery. (see figure 29)
NEVER REMOVE THE STRIP OF CAPS NOR ADD ANY WATER OR
ELECTROLYTE.
24