Filter
Top Products
VEHICLE
VEHICLE
ASSEMBL
ASSEMBL
Y
Y
Step 3
Attach the Front Bumper
Attach the front bumper as shown
using the bolts provided. Note there
are four attaching points. Two on the
top and two on the bottom. Fig 8.
Attaching
Points
Step 4
Connect the Wiring for the Lights
Attach the wires from the Ignition to
the wires found on the right side of
the bar cage. Attach wires with cor-
responding colors. Fig 9
Step 5
Insert the headrest
Insert the headrest as shown. Fig 10.
Refer to the Periodic Maintenance Section of this Manual for Information
on Fuel, Oil, Battery Service, and other vital information.
Figure 8
Figure 9
Figure 10
8