Filter
Top Products
OPERA
OPERA
TION CONTROLS
TION CONTROLS
H. Seat Adjustment
The seat must always be securely fastened in the
position which best affords the operator control of
the foot pedals, steering wheel, and the remote
stop button.
a. Pull seat adjustment handle upward to disengage
seat slide.
b. Move seat to desired position.
c. Be sure seat adjustment handle snaps back into
place and that seat is locked into position.
I. Seat Belts
This Vehicle is equipped with a seat belt for the operator and a seat belt
for the passenger of a double seat vehicle (if applicable). No one should
ever attempt to ride the Vehicle without being seated, with the seat belt
properly secured.
After being seated in the vehicle, place your arms through the shoulder
straps. Next, buckle the lap belt and adjust the tightness of the lap belt
by pulling the loose ends outward. The shoulder harness should then be
adjusted by pulling down on the loose ends.
Before attempting to adjust the seat, ensure that the vehicle engine is stopped.
Never operate this vehicle when the seat is not securely fastened. To do so could
result in the possibility of severe personal injury or loss of life. Before attempting to
adjust the seat, ensure the vehicle’s engine is stopped.
Operating the vehicle without the seat belt fastened properly could result in the
operator or passenger (if applicable) being ejected from the vehicle, and coming in
contact with the ground or the custom bar cage in case of collisions or rollover. This
could result in severe injury or death.
13