Filter
Top Products
OPERA
OPERA
TION CONTROLS
TION CONTROLS
E. Reverse Operation
When the forward / reverse lever is in the "D" position the
vehicle will move forward when the throttle is pressed. When
the forward / reverse level is pulled back to “R” the vehicle will
move backward when the throttle is pressed. (See Fig.4)
When reverse lever is in the drive position, there need to be
1/2 inch of play in the reverse level. If the adjustment is not
correct, then loosen the lock nut #2, then adjust lock nut #1 to
the proper amount of play.
F. Parking Brake
See Fig 1. on page ?? for the location of the parking brake.
The to engage the parking brake pull back on the lever. THE
PARKING BRAKE SHOULD ONLY BE USED WHEN THE
VEHICLE IS NOT MOVING.
G. Passengers
The vehicle allows for two riders only. Combine maximum weight of driver and the passenger should
not exceed 180kg or 400lbs.
NOTE:
Insure the parking brake is not engaged when the vehicle is in operation. Operating
the vehicle with the parking brake engaged will wear the brake pads quickly and brak-
ing power could be lost.
Note: Push the throttle slowly
when the reverse in engaged.
12