Filter
Top Products
Available Functions for Display in MG2000 Speedometer Screens
The functions listed below can be displayed in the user configured screens. All of
the functions may not be available in your installation. If a function is selected for
display and that function does not appear on the screen, the function does not exist
in this installation. A function is selected for display by selecting it’s number from the
list below.
1. Clock
2. COG (Course Over Ground)
3. GPS Speed
4. LAT & LONG
5. Fuel Level
6. Barometer
7. Air Temperature (Analog input to MG2000 Speedometer from air temp
sender)
8. Water Temperature (from bus)
9. Trip
10. Odometer
11. Range
Page 13