Filter
Top Products
33
© 2003 directed electronics, inc.
will flash for 30-seconds. To stop the Panic Mode at any time,
press again.
silent mode
Use the Silent Mode to temporarily turn off the arm or disarm
chirps by briefly pressing before pressing the when
arming or disarming. The confirmation chirp(s) will then be
eliminated for that one operation only. To permanently turn off
the arm and disarm chirps, see the programming section of this
guide.
valet mode
Valet Mode prevents your security system from passive arming.
All transmitter convenience functions (door locks, trunk release,
etc.) remain operational. This feature is useful when washing or
servicing your vehicle. You can access Valet Mode either manu-
ally or from the remote transmitter.
➜
note: The Warn Away Response to lighter impacts is
bypassed if the system is armed using the Silent Mode.
This ensures that the siren does not chirp in an environ-
ment where you do not want chirps to be emitted. The
system is still capable of being triggered by heavier
impacts; only the Warn Away Response generated by
light impacts is bypassed.
➜