Filter
Top Products
13
© 2003 directed electronics, inc.
Connect the BLACK starter kill wires as shown below. Use one of
these wires as the starter kill input and the other as a starter kill
output wire (these wires are interchangeable).
step 5
Parking light flash
There are several different types of parking light circuits. The
following description is for a standard positive-triggered parking
light circuit, usually located at the light switch. If the web vehicle
information suggests a different type of parking light circuit,
please contact Rattler Technical Support.
Using the web information on the vehicle, locate the suspected
wire and place the BLACK lead of the meter to a ground and
secure it. Place the multi-meter in the DC position. Using the
RED lead of the meter, probe the wire. With the switch in the
off position the meter will read 0.00 volts. While watching the
meter, turn the switch to the parking light position. The meter
will read between 10.00 volts and 13.00 volts.
➜