Filter
Top Products
22
© 2003 directed electronics, inc.
ttrraannssmmiitttteerr//rreecceeiivveerr
lleeaarrnn rroouuttiinnee
The system comes with 2 transmitters that have been taught to
the receiver. The receiver can store up to 4 different transmitter
codes in memory. Use the following learn routine to add trans-
mitters to the system or to change button assignments if desired.
The Valet
®
/Program switch, plugged into the blue port, is used for
programming. There is a basic sequence of steps to remember when-
ever programming this unit: Door, Key, Choose, Transmit and
Release.
1.
OOppeenn aa vveehhiiccllee ddoooorr.. ((
The GREEN wire,
H1/5, or the VIOLET, H1/7 must be connect-
ed.)
2.
KKeeyy..
Turn the ignition to the ON position.