Filter
Top Products
20
© 2003 directed electronics, inc.
work correctly check your wiring against the manual and verify
all connections. If you still are experiencing problems contact
Rattler technical support.
ttrraannssmmiitttteerr ffuunnccttiioonnss
The receiver uses a computer-based learn routine to learn the
transmitter buttons. This makes it possible to assign any specific
transmitter button, or combination of buttons, to any receiver
function. The transmitter initially comes programmed in the
Standard Configuration, but may also be customized. Unless
otherwise specified, the buttons used in all of the instructions in
this manual correspond to a Standard Configured transmitter.
note: If the shock sensor does not operate as described,
see the Shock sensor adjustment section of this guide.