Filter
Top Products
25
© 2003 directed electronics, inc.
ooppeerraattiinngg sseettttiinnggss lleeaarrnn rroouuttiinnee
Many of the operating settings of this unit are programmable.
They can be changed whenever necessary through the Operating
Settings Learn Routine™. The Valet
®
/Program push-button
switch, plugged into the blue port, is used together with a
programmed transmitter to change the settings.
To enter the System Features Learn Routine™:
1.
OOppeenn aa ddoooorr.. ((
The GREEN wire, H1/5, or
the VIOLET, H1/7 must be connected.)
2.
IIggnniittiioonn..
Turn the ignition on, then back off.
(The H1/9 YELLOW switched ignition input
must be connected.)
3.
CChhoooossee..
Within 10 seconds, press and
release the Valet
®
/Program switch the number
of times for the desired function. Then press the
switch once more and hold it. The siren will
chirp and the LED will flash to confirm the selected channel. Do
not release the Valet
®
/Program switch.