Filter
Top Products
32
© 2003 directed electronics, inc.
disarming without a transmitter
If your remote transmitter is lost or damaged, you can manually
disarm your vehicle security system. To disarm the system
without a transmitter, you must have the vehicle's ignition key
and know where the Valet®/Program switch is located. Be sure
to check with your installer at the time of installation for its loca-
tion.
TToo ddiissaarrmm tthhee sseeccuurriittyy ssyysstteemm::
1.Turn the ignition key on.
2.Press the Valet®/Program
switch within 15 seconds. The
system will now disarm.
panic mode
If you are threatened in or near your vehicle, you can press
for 1.5 seconds to trigger Panic Mode on your security system
and attract attention. The siren will sound and the parking lights
➜
note: If the system does not disarm, you may have
waited too long to press the Valet®/Program
switch; turn the ignition off and repeat the process.
DRW-35
➜